Remotely operated vehicle inspections for subsea structures, pipelines, mooring systems, aquaculture net cages and hull surveys, without sending divers down or mobilising a saturation crew.
Request a QuoteTell us about the asset, depth and scope. We usually reply within one business day.
ROV inspection pulls HD video, sonar and CP-probe data off subsea structures straight from the surface, so you skip the cost, the mobilisation time and the risk of saturation diving.
Observation-class ROV matched to water depth, current and inspection scope.
HD/4K video and scanning sonar for structural and pipeline route surveys.
Cathodic protection (CP) potential measurements at structural nodes via integrated probe.
Live feed runs topside in real time, so engineers can review while the survey is happening.
No saturation diving. That means no hyperbaric chamber, no decompression schedule.
High-definition imagery of welds, coatings, anodes and structural details.
Scanning sonar maps pipelines, free-spans and seabed features.
Direct CP-potential measurements verify corrosion-protection performance.
Real-time HD feed, so engineers can review and direct from the control container.
Observation-class ROV inspection of subsea structures, pipelines and hulls in nearshore and shallow water.
Indicative figures based on typical engagements. Actual numbers depend on scope, asset and access constraints.
Route survey, free-span detection, coating condition, anode mapping for offshore pipelines.
Chain link condition, twist detection, fairlead and tensioner inspection on FPSOs and floating units.
Welds, brace condition, marine growth assessment on fixed offshore platforms.
In-water hull surveys for class compliance, so routine inspection doesn't need dry-docking.
Visual condition of tiebacks, manifolds, X-mas trees and ROV tooling interfaces.
Below-waterline structural condition of quay walls, dolphins and submerged piling.
Net integrity, biofouling condition and mooring/anchor line inspection on fish farm cages, without divers in the water.
ROVs skip the cost and mobilisation lead-time of saturation diving. No hyperbaric chamber, no decompression schedule, no diver-day rates. They also reach depths and currents where diver work is unsafe or simply not allowed.
HD/4K video logged with timestamp and depth, CP probe readings at recorded waypoints, scanning sonar maps where applicable, structured anomaly register, and an annotated inspection report.
Yes. Our ROVs carry integrated CP probes for direct potential measurement at structural nodes, which we use to verify corrosion protection performance against the design baseline.
We run observation-class ROVs for visual surveys, CP measurement and pipeline and structure inspection. Which one we bring depends on water depth, current and job scope.
Tell us about the asset, depth, current and scope. We'll match the right ROV class and propose a survey plan.